F10 SC Veterinary Disinfectant - 200ml

F10, Veterinary Disinfectant - 200ml

F10^®SC is a veterinary disinfectant which achieves a broad spectrum kill of potentially harmful micro-organisms. It is active against bacteria, viruses, fungi and spores, and environmentally effective against the protozoal oocysts of cryptosporidium, coccidia and giardia. It is an excellent product for achieving a high level of biosecurity and can be used in presence of animals when at recommended dilutions.

At working dilutions it is non-corrosive, non-tainting and non-irritating, and is also chlorine- and aldehyde-free.

• Total spectrum of kill – bactericidal, virucidal, fungicidal, sporicidal, tuberculocidal
• Rapid speed of kill – 30 secs Gram +ve bacteria and 60 secs Gram -ve bacteria at a 1:500 dilution
• Unique chemical compound based on biguanide/quaternary ammonium actives combination
• Less chance of resistance build up than with a single active ingredient
• Kills Parvo in under 20 minutes
• Non corrosive, non-toxic, non-tainting, not-irritation, safe to handle, biodegradable and ecologically friendly
• Highly effective at low concentrations
• No rinse off required after use, just apply and leave to dry
• Stays active providing ongoing residual protection
• Cost effective
• Proven in a wide range of different veterinary situations, from clinics and hospitals to farming environments.

Directions:

• Remove any dirt from the surfaces so they are visibly clean (pre-clean to optimise the disinfection process)
• Add the required amount of F10^®SC to 1 litre of water - i.e. to create a dilution rate of 1:250 add 4ml*
• Note - the 5 litre bottle can be bought with a 4ml dosing pump for accurate measurement. Smaller bottles include a measuring well, which can be used to measure the correct amount
  
• Spray or wash the surfaces/object using the solution
• Leave to air dry - no need to rinse or wipe off the F10^® solution

* 1:250 is recommended for efficiency against most pathogens. If more resistant viruses are known to be present, use at 1:100 (10ml/litre). For control of protozoal oocysts use at 1:100 (10ml/litre). For general disinfection use at 1:500 (2ml/litre).

Information:

Ingredients: PHMB and Benzalkonium Chloride.
Store in a cool, dry and protected from light.

F10 SC SDS